A Basic Guide on Creating Custom Chair Cushions

December 3, 2015 by  
Filed under Hardware

Comments Off on A Basic Guide on Creating Custom Chair Cushions

Chair CushionsIf you want a decorative and artsy project, try upholstering your cushions with new fabrics. Anybody with basic sewing skills could perform this project. It’s easy, fun, and opens up a new set of decorative possibilities for your home.

First, take out the cushion filling and place it on the side. Make sure that you keep an eye on how the old cushion cover was sewed, so you can imitate the same style for an optimal it.

Next, you’re going to measure the seam allowances, which is basically the distance from the seam line to the edge of the fabric piece. Remember this measurement as it’s going to be important when you sew your new fabric pieces together again. Lay it out flat on the surface and measure the length and the width of the cover.

Take your new fabric and trace it over the old cushion cover that you were using. This will give you a rough idea of the exact size that you need. Cut your fabric pieces.

Seam each fabric piece together according to size. Be sure that there is enough space for you to sew a zipper on your cover (if needed). Check your newly sewn cover again to make sure that it is a near replica of your old cover’s size. Stuff the filling back inside, and you’ve just created some brand new cushions.

Place your brand new custom foam cushions back on your chair, and test it out to make sure that it’s just the exact type of comfort that you were looking for.

Bio: The Foam Factory, Inc. is a global presence in the foam manufacturing industry. They have been providing foam products to customers around the world for more than 30 years.

Boat mattress replacement 101

April 16, 2015 by  
Filed under Hardware, Industrial and Manufacturing

Comments Off on Boat mattress replacement 101

Written by TheFoamFactory.com

The marine environment is one of the most humid out there and certainly not the most appropriate one for foam products. Despite the fact that you boat is made to last and can remain in great condition even after decades, the boat mattress, would unfortunately be subject to decline. The damage might either come from humidity, sea water or just wear and tear. Foam might also be attacked by mold and mildew from exposure to water, humidity and heat.

Damaged and saggy mattresses are quite uncomfortable to sleep on, especially when one has to spend several days at sea. With time this might take its toll on the body and lead to chronic pains. A solution to overcome this would be go about with a mattress replacement project. This can be done as a DIY project by purchasing all the required materials from specialized shops.

When it comes to the marine foam cushions, these can be bought from a foam factory. Most companies now allow customers with the possibility of having the foam custom cut for suit their individual project needs. For the marine environment, one of the most important factors to look out for the foam would be its fast-drying ability. Generally, open-celled foam tend to retain less humidity and catch less mold and mildew. These types of foam are also anti-microbial.

The Foam Factory specializes in various foam products suited for the marine environment. One of their product offering include a special fast-drying foam convenient as boat mattress replacement.

Upgrade your RV with New Bedding

December 12, 2014 by  
Filed under Hardware, Industrial and Manufacturing

Comments Off on Upgrade your RV with New Bedding


Your RV might be made to last but unfortunately cushions and foam elements might be quickly damaged with weather elements such as the rain, mold and mildew. Some other forms of deterioration in cushions and beddings might be due to moth infestation or just plain wear and tear. If you wish to keep on using your camper for more years to come, you might consider replacing your camper cushions and beddings. This can also be achieved by a foam replacement. If you are used to DIY projects, you could perform the project yourself or you might have it changed by a professional auto-body shop.

The DIY method could be a cost-effective and gratifying solution. You would first need to select the right type of foam suited for your RV. Generally, durable and good quality foams would enable you to enjoy your RV longer. Several foam companies offer the possibility of having custom cushion sizes to fit your project’s dimension. You might want to enquire with foam companies’ staff to gain information on this.

Since the year 1980, Carlo Badalamenti has worked in the foam industry. His experience has enabled him to gain insights on how to choose the right foam for different applications. For RV beddings, the most adequate foam would have to be dense, soft and firm as well as being fast-drying in order not to absorb moisture and to deter the proliferation of bacteria.

The Foam Factory specializes in providing foam products for different types of foam replacement projects, including RV bedding solutions.

Replacing Your Boat’s Foam Cushions

December 5, 2014 by  
Filed under Hardware, Industrial and Manufacturing

Comments Off on Replacing Your Boat’s Foam Cushions

Cushions on a boat’s deck or hull can make your sailing experience far more pleasant. Seating space is the perfect complement to a lovely day out on the open sea, so refinishing your cushions is an important part of boat renovation. You need to decide what type of floatation your desired foam can provide in the event of an emergency, how comfortable each type is going to be, and of course what the cost of your foam replacement will be after all of your modifications are completed. Before you call a professional and pay exorbitant prices, consider these options before changing your foam cushions.

If you want to add or replace a mattress in your below-deck area, the first thing to consider is how comfortable you will be when sleeping or relaxing on different types of foam. Some is more dense and firm, while other types are more spongy and soft. You can even use foam pillows to add more floatation options if you so desire. Mattress replacement on a boat isn’t just about looks. They serve the practical purpose of providing a flotation device in the event that you need one.

Cushions for on-deck seating are also very important. The foam in these is usually firm to absorb the movements of the waves and the boat itself while you enjoy the ride or while fishing. Most boat owners cover their cushions with either leather or vinyl. The vinyl works well with foam because the slick coating doesn’t allow most water to penetrate the filling, and most boat owners who have previously had leather seats tend to replace them with vinyl to keep moisture away from the foam. Moisture, especially from salt water, could cause disintegration if left unchecked.

Whether you are replacing a mattress or the seating on your boat, the foam contained within them is very important when it comes to comfort and safety. Since most of these also double as floatation devices in emergency situations, it’s important to realize boat cushions are more than just back support. Even if you are just thinking about adding a mattress below deck for those overnight fishing trips or for napping during a leisurely trip around the lake, it is important to think about the foam that you choose for your boating needs. Replacing the foam yourself can be tedious, but well worth it when you think about your individual desire for your boat. Choose your foam cushions carefully for a comfortable, safe boating experience every time!
TheFoamFactory.com sells foam custom cut for new cushions of any size or use. Order your next foam inserts from The Foam Factory today!